Building a Solid New Home Foundation

If you study the exterior or interior appearance of your house, the foundation is not visible. For most people, it seems though the foundation is non-existent. However, even though the foundation doesn’t scream “I’m here!” unlike the other components of our house that are obvious, we shouldn’t be mindless of it. After all, it’s the reason why our house is still standing still.  

Home Foundation 

The foundation and footings in our homes are like the legs and feet of our body, so without them we cannot go anywhere. The footings served as the anchor to the ground while the foundation carries the structure’s weight.  

Foundations are made from different materials, like block, concrete, stones and even treated woods. The process involves erecting the wooden forms, installing reinforcing bars, pouring the form with concrete and removing the form once the concrete dries.  

The types of foundation you should know about are crawl space foundation, full basement foundation and slab-on foundation. The experts of foundation repair in Mesquite will assess your location and recommend you one of the foundations mentioned.  

Crawlspace Foundation 

This type of foundation is common in the homes of Midwest and Southeast USA. Its footings are laid below the frost line and there’s a space between the floor frame and the ground for a crawling space. A foundation vent opening is added on most crawl spaces to avoid moisture buildup. This is because one of the disadvantages of a crawl space foundation is that it can be a breeding ground of moisture.  

Maintenance and regular check-up is important to make sure that the moisture and mold is not infesting in the crawl space because they can soak the framing and will lead it to rot which means that the house will suffer a structural failure.  

Full Basements Foundation  

Full basements are usually found in many areas but most especially in the Northeastern part. This foundation has a high wall (8 foot) that encloses a concrete slab (thick poured, 4 inches). The footings in this type of foundation are placed deep below the frost depth of the region. Before, basements are not finished. But now homeowners turn these areas into a gym, recreational area or entertainment center. If the slop is good, you will get the good ventilation and natural light in this space.  

However, if you opt to do so too, beneath the slab you should install rigid foam insulation. This will make the basement more comfortable. A proper insulation will prevent the walls and slabs from mold and mildew infestation.  


This type of foundation consists of concrete slab poured at the grade level. There are shallow footings installed that transfers the structure’s weight to the ground. This is commonly found in warm regions. When constructing one, rigid foam insulation is installed under the slab to make the area more comfortable. If you live in colder climate, there would be required installations of special frost proofing. Remember that your location, the soil condition and the weather are the important things to consider when choosing a type of foundation. And oh, don’t forget your budget.  

Read More

Types of Heat Pump Repairs

Heat pumps are a great invention that allows people in possession of this device to control the temperature of the area to their likings. One of the most popular uses of the heat pump is in houses because during the winter it gets too cold, and in the summer it gets too hot, but with the heat pump, you will be able to control the temperature to make it just right. You may be wondering how will the heat pump be transferring cold air when it is too hot. Well even in the cold air there is hot air, and that air is extracted and transferred to the room that needs it. Like anything, the heat pump has its problems. Here are some of the common heat pump repairs that heat pump owners usually experience. 

 Heat Pump Repairs

One of the most common issues when it comes to repair my heat pump is when it is not running. Usually, when the heat pump is not running, it is most probably due to the thermostat or the unit itself is not receiving enough power to function.  The thermostat may not be compatible with the unit which is why it does not want to work. Make sure to check on it and if it is set to the right temperature and examine if it will work.

If you are not experienced in checking this than calling a repairman will help you fix it. To check if it is not receiving enough power, check the electrical circuit breakers connected to the unit and check if it is working. There is also two switches in the main electrical breaker and one way to troubleshoot the problem is by turning the switch on then off. This will usually do the trick but if not then calling a maintenance specialist would be the best option.

Another problem will be if the heat pump is not cooling or heating the area. The first thing to check when it is not cooling, or heating is the thermostat. One troubleshooting tip would be to turn the thermostat 5 degrees up and leave it for about a few minutes. If the temperature has not changed, then there is surely a problem with the unit.

Check the filters of the pump because it may just be jammed and a quick fix to that is by removing what is clogging the filters or simply wiping the filters. Also, clean the coils of the unit and check if they are working. If these quick fixes did not do the trick, then there is truly a problem that only a repairer can fix.   

If the heat pump blower is not functioning properly, this would be another example of a heat pump repair. This would usually be due to the thermostat mounted on the wall or the limit switch located on the unit. Turn off the whole unit completely and examine the heating supply outlet. The belt would either be too tight or too loose and if you do not know how to tighten or loosen it then call the repairman. These are some of the different types of heat pump repairs you may experience with a heat pump.

Read More

How to Open a Car Dealership

People buy and use car for different purposes. The costs don’t only consist of one-time pay, but you also have to prepare money for maintenance and other expenses. With this reason, consumers including you who want to venture into this kind of business, seek out dealers to get the best deals. Opening up a car dealership business is costly, it will require you millions of dollars. So before you decide to start one, you better think it through. As a start, follow the steps below.  

 Car Dealership

Perform a Market Research 

The first step when you venture into any business is to determine if there’s a demand for the service or product. Once you did that, think about how the company will attract its prospect customers. First, determine the number of cars that have been sold in your area. Once you determine this, research the purchases by category.  

For example, categorized the purchases into trucks, cars, old ones, new ones, and determine the model. Next, assess the existing car dealers in your area. For example, you’re considering being a Lincoln Dealers in Hammond LA; many existing Lincoln dealers are in your area? How many Lincoln cars are sold? This thorough analysis will help you.  

Determine Your Ideal Customer 

Determining your ideal customer will help you design your business to cater their needs. An ideal customer is a summary of the traits that a best customer has. Look at the occupation, age and income level of your prospect customers. If you want to open a Lincoln dealership, research what kind of people buy a Lincoln. Find out too where an ideal Lincoln customer gets their car serviced. Would they go to a local repair shop or the car dealer?  

Consider Opening a Franchise 

Most of the big car dealership businesses are franchises. In this process, you’re going to pay the franchisor and sign an agreement so you can operate your business. To open such dealership, you will need to provide an extensive financial disclosure. The franchisor will then grant you the right to use the logo and other marketing tools. The franchisor will also supply you with cars.  

If you franchise a popular brand of car, your business will gain credibility in the marketplace. It will help you to generate large sales. There are restrictions which would be stated on the agreement. Follow the requirements then you’re good to go.  

Decide on Whether to Sell New or Old Cars, or Both 

When you decide to sell both types of cars, you will be accommodating two types of customers. This will require a larger investment though. If you sell used cars, your customers are going to spend less money on it. Instead of purchasing a $35,000 car, they will buy a $20,000 used one. Used cars also require more maintenance, so you also have the opportunity to expanding your business.   

Add the Costs Needed to Fuel the Business 

The typical car dealing business requires a million dollars or more. The inventory of the cars is going to be the biggest part of that cost. In addition to the inventory, you’re going to purchase a property. If you’re going to franchise, there are also franchise fees you’re going to pay.  

Read More